Remote Elevation Measurement rem with diagram

REM Today i am writing about the Remote Elevation Measurement as you know that last time i published a post about the Missing Line Measurement, some of my website viewers comment about to make a guide about Remote Elevation Measurement on total station. So i make a simple and easy post about in which i explain you all about Measure Elevation  Measurement of height .

Remote Elevation Measurement rem with diagram 

OK lets start ?     First of all do the Temporary adjustment of the instrument . I have upload this post if you have not read this post then CLICK HERE to know that how can you do temporary adjustment of the total station. After completing that process then open the total station option which  i m going to explaining you one by one  .
REM ( Remote Elevation Measurement )
We can find the height of desire point from REM ( Remote Elevation Measurement ).for go to REM ( Remote Elevation Measurement )  option  select the Obs option from the status screen then change the page form function and select the menu . the menu option is available on page 2 and select REM ( Remote Elevation Measurements )  form the menu option .

 which place you want to find height keep the prism and focus the toe of prism  from total station and press meas option .Then select the REM option and target the object above the target for height measurement and press stop .
Your reading will appear on the screen .

 Another short procedure Finding Remote Elevation Measurement REM on Total Station

• Set the Target Height from “Meas” > “Menu” >
• “Coord” > “Station Orientation” > “Station
• Coordinate” Set the target height to the measured height of the
• mirror target. You did not have to fill out the other
• fields for a REM (Remote Elevation Measurement) measure 
• Press “ESC” to return to the “meas” menu Select the “meas” > “Menu” > “REM”, sight the
• mirror target, press [OBS] to measure “S”, then
• [STOP] Sight the object above the target for height
• measurement Select [REM] and then [STOP]
  

Related posts

Traverse Method / Survey Traverse Procedure
How to Measure a Bearing / Bearings Measurement
Closed Traverse Survey Method With Example
WHAT IS TOTAL STATION OR TS
What Is Coordinate And Its Types
Coordinate Measuring on Total Station / finding co...
what's Natural surface level and how to find it
How to Calculate Curve Using Curve Formula
Coordinates And Its Types With Diagram
How to Calculate Curve Using Curve Formula
Methods of Topographic Survey on Total station
How to find Area of Land Using Total Station
 Method of Traversing in Surveying

Procedure no 3 To Find Remote Elevation Measurement REM  on Total Station

OK first sent the helper (prism man) to the point and tell him to keep the prism on the point.
If the prism could not be placed at some point then the prism is set exactly below that point. the instrument if first sighted at he prism then the point is sighted the coordinate of the prism and the place of instrument are recorded beforehand . then the height of the point is shown on the screen .

You might also like these post

Scale Photography With Formula and Example

How To Find Missing Line Measurement MLM

Triangulation Method or Procedure of Triangulation...

Explanation of Triangulation Surveying with it's P...

  What is Photogrammetry Surveying

Micrometer Reading with Example

Thank you for reading this post Measure Elevation .If you have any problem then  contact us or comment us and share with your friends .

                                                                Go To Home